FIAT Grande Punto Actual User Manual

Page 31

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
To cancel the setting, proceed as follows:

– briefly press button MENU ESC: (On)
will flash on the display;

– press button –: (Off) will flash on the dis-
play;

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Rain sensor sensitivity adjustment
(Rain sensor) (where provided)

With this function it is possible to adjust
the rain sensor sensitivity according to 4
levels.

To set the required sensitivity level pro-
ceed as follows:

– briefly press button MENU ESC, the
previously set sensitivity “level” will flash
on the display;

Speed limit (Speed Beep)

With this function it is possible to set the
car speed limit (km/h or mph); when this
limit is exceeded the driver is immediate-
ly alerted (see section “Warning lights and
messages”).

To set the speed limit, proceed as follows:

– briefly press button MENU ESC, the
display will show the wording (Speed
Beep);

– press button + or – to select speed lim-
it activation (On) or deactivation (Off);

– if the function has been activated (On),
press buttons + or – to select the re-
quired speed limit and then press MENU
ESC to confirm.

Note The possible setting is between 30 and
200 km/h, or between 20 and 125 mph de-
pending on the unit set previously (see para-
graph “Setting the distance unit (Units)”) de-
scribed later. Every press on button + / – in-
creases/decreases by 5 units. Keeping the
button + / – pressed obtains the automatic
fast increase or decrease. When you are
near the required setting complete adjust-
ment by single presses.

– press button + or – for setting;

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Trip B On/Off (tripB data)

Through this option it is possible to acti-
vate (On) or deactivate (Off) the Trip B
(partial trip).

For further information see “Trip com-
puter”.

For activation / deactivation, proceed as
follows:

– briefly press button MENU ESC: (On)
or (Off) will flash on the display (accord-
ing to previous setting);

– press button + or – for setting;

– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

DISPLAY FUNCTIONS
(see Multifunctional Display or Reconfigurable Multifunctional Display)