FIAT Grande Punto Actual - Manual (Page 162)

160
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
Versions with steel rims
Proceed as follows:
❒ Make sure the contact surfaces be-
tween standard wheel and hub are
clean so that the fastening bolts will not
come loose;
❒ Fit the standard wheel by inserting the
first bolt for two threads into the hole
closest to the inflation valve;
❒ Fit the wheel cap making the lunette
hole coincide with the bolt you have fit-
ted then, fit the other 3 bolts;
❒ Using the wrench provided, tighten the
fastening bolts;
❒ Lower the car and remove the jack;
❒ Using the wrench provided, fully tight-
en the bolts in the sequence shown
previously in the figure.
Versions with alloy rims
Proceed as follows:
❒ Insert the wheel on the hub and using
the wrench provided tighten the bolts;
❒ Lower the car and remove the jack;
❒ Using the wrench provided, fully tight-
en the bolts in the sequence shown in
the figure.
When you have finished
❒ Stow the spare wheel in the space pro-
vided in the boot;
❒ Fit the jack partially open in its con-
tainer C-fig. 2 forcing it lightly to pre-
vent it from vibrating when travelling;
❒ Put the tools back into their places in
the container;
❒ Stow the container C-fig. 2, complete
with tools in the spare wheel;
❒ Tighten the tool container clamping de-
vice A-fig. 2;
❒ refit the boot carpet or the Cargo box
(where provided).