FIAT Grande Punto Actual - Manual (Page 175)

173
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT CEILING LIGHT
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light A-fig. 30;
❒ open the protection lid B;
❒ replace bulbs C-fig. 31 releasing them
from the side contacts; make sure that
new bulbs are correctly clamped be-
tween contacts;
❒ re-close the lid B-fig. 31 and secure light
A-fig. 30 into its housing locking it
properly.
REAR CEILING LIGHT
(where provided)
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light D-fig. 32;
❒ open the protection lid E-fig. 33;
❒ replace bulb F-fig. 33 releasing it from
the side contacts making sure that the
new bulb is correctly clamped between
the contacts;
❒ re-close the protection lid E-fig. 33
and secure light D-fig. 32 into its hous-
ing locking it properly.
fig. 30 F0M0213m
fig. 31 F0M0234m
fig. 32 F0M0214m
fig. 33 F0M0235m