FIAT Grande Punto Actual User Manual

Page 209

207

ARNING

LIGHTS AND MESSAGES

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

Changing the windscreen wiper
blades fig. 15

To remove the blade:
❒ raise the windscreen wiper arm A;
❒ turn blade B 90° around pin C, locat-

ed at the end of the wiper arm;

❒ remove the blade from the pin C.
To refit the blade:
❒ fit pin C into the hole loacted in the

middle of the blade B;

❒ refit the arm with the blade on the

windscreen.

fig. 15

F0M0161m

Changing the rear window
blade fig. 16

Proceed as follows:
❒ raise the cover A and remove the arm

from the car, slackening the nut B that
fastens it to the pivot pin;

❒ fit the new arm, positioning it correct-

ly, and fully tighten the nut;

❒ lower the cover.

fig. 16

F0M0162m

SPRAY NOZZLES

Windscreen wiper fig. 17

If the jet of fluid is inadequate, firstly check
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).

Then check that the nozzle holes are not
clogged, if necessary use a needle.

fig. 17

F0M0163m