FIAT Grande Punto Actual - Manual (Page 170)

168
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT UNITS fig. 16
The front light units contain sidelights,
dipped beam, main beam and direction in-
dicator bulbs.
The bulbs are arranged inside the light unit
as follows:
A sidelights
B dipped beams/main beams (double
light)
C direction indicators
SIDELIGHTS fig. 17
To change the bulb, proceed as follows:
❒ remove the snap-fitted rubber cap A,
as shown by the arrow;
❒ press tabs B and remove the bulb hold-
er;
❒ remove the bulb C and replace it;
❒ refit the bulb holder and refit the cap
A, check for proper locking.
fig. 16 F0M0178m fig. 17 F0M0179m