FIAT Grande Punto Actual - Manual (Page 171)

169
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
DIPPED BEAM/ MAIN BEAM
HEADLIGHTS fig. 18
To change the bulb, proceed as follows:
❒ remove the snap-fitted rubber cap A,
as shown by the arrow;
❒ disconnect the central electric connec-
tor and release the bulb holder catch;
❒ remove the bulb B and replace it;
❒ fit the new bulb, making the outlines of
the metallic part coincide with the
grooves on the reflector;
❒ refit the bulb holder catch and reconnect
the electrical connector;
❒ refit the cap A locking it properly.
DIRECTION INDICATORS
Front fig. 19/a - 19/b
To change the bulb, proceed as follows:
❒ steer the right/left wheel outwards;
❒ turn the catch A-fig. 19/a as shown by
the arrow, then use the lid B;
❒ remove the cover/bulb holder C-
fig. 19/b turning counterclockwise;
❒ remove the bulb D pushing it gently and
turning counterclockwise (“bayonet”
clamping), then replace it;
❒ refit the cover/bulb holder C by turn-
ing it clockwise and locking it proper-
ly;
❒ close the lid B-fig. 19/a the turn the
catch A.
fig. 18 F0M0180m fig. 19/a F0M0261m fig. 19/b F0M0181m