FIAT Panda User Manual

Page 94

ADJUSTING THE SEAT BELT HEIGHT
(for versions/markets, where provided)
The height can be adjusted to 4 different positions.
To adjust, press button A fig. 81 and lower or raise
the grip B.
Always adjust the seat belt height adapting it to the
passenger's body: this precaution may considerably
reduce the risk of injury in the event of a collision.
Correct adjustment is obtained when the belt passes
approximately half way between the shoulder and
the neck.
For some versions, front seat belts have just one
fixed anchor point C fig. 82 on the door pillar.

SBR SYSTEM (Seat Belt Reminder)

This system consists of a device which, in
conjunction with the switching on of the

warning

light on the instrument panel and an intermittent
acoustic signal, warns the driver and front passenger
if their seat belts have not been fastened. The icon
A

fig. 83 indicates that the seat belt is not

fastened. The icon B

fig. 83 indicates that the seat

belt is fastened.
For permanent deactivation, contact a Fiat
Dealership. The SBR system can only be reactivated
via the display Setup Menu (see “Knowing your
car” section).
The amber warning lights operate as follows:
❒ 1 = front left seat (driver status for left-hand drive

versions);

❒ 2 = rear left seat (passenger) (for versions/markets

where provided);

fig. 81

F0W0313

fig. 82

F0W0314

GETTINGTO KNOW

YOURCAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX