FIAT Panda - Manual (Page 243)

AUX (only with the Blue&Me™
system)
(for versions/markets, where provided)
INTRODUCTION
This section describes the variants regarding the
operation of the AUX source: as far as the operation
of the radio is concerned, refer to the description in
the "Functions and Adjustments" chapter.
AUX MODE
To activate the AUX source, press the MEDIA
button or the SRC control on the steering wheel
several times until the corresponding source is
displayed.
IMPORTANT
The functions of the device connected to the AUX
socket are directly managed by the device itself; it is
not possible to change track/folder/playlist with radio
or steering wheel controls.
Do not leave the cable of your portable player
connected with the AUX socket after disconnection,
to avoid possible hiss from the speakers.
NOTE The AUX socket is not incorporated in the
radio. For its position, refer to the Blue&Me™
Supplement and its Quick Guide.
TROUBLESHOOTING
GENERAL
Low volume
The Fader function should be adjusted only to the
values "F" (front) to prevent a reduction in radio
output power and the muting of the volume if the
Fader level adjustment is equal to R+9.
Source cannot be selected
Nothing has been inserted.
Insert the CD or CD MP3 to be played.
CD PLAYER
The CD does not play
The CD is dirty. Clean the CD.
The CD is scratched. Try using another CD.
The CD cannot be loaded
A CD is already loaded. Press the button and
remove the CD.
239
SOUND-S
YSTEM