FIAT Panda - Manual (Page 104)

"ISOFIX" CHILD SEAT SETUP
The car can be fitted with a Universal Isofix child
seat, a new European standardised system for
carrying children safely.
Isofix systems can be fitted alongside traditional child
seats. An example of Universal Isofix child seat
covering weight group 1 is shown in fig. 91. Specific
Isofix child seats cover the other weight groups.
These seats must be designed, tested and
type-approved specifically for this car (see the list of
cars attached to the child seat).
IMPORTANT The rear central seat (for versions
where provided) and the passenger front seat are not
approved for any type of Isofix child seat.
INSTALLING A UNIVERSAL ISOFIX CHILD
SEAT
Secure the seat using the special lower metal rings A
fig. 92 positioned between rear backrest and cushion,
then fix the upper belt (provided with the child
seat) to the attachments B fig. 92 located in the rear
part of the backrest.
“Universal Isofix” Child seats can be fitted alongside
traditional child seats. Remember that when using
a Universal Isofix child seat, you can only use
approved seats with the marking ECE R44/03
“Universal Isofix”.
Universal Isofix “Duo Plus” child seats and the
special "G 0/1 S" seat are available from Lineaccessori
Fiat. Contact the dealer for more information. For
further details on installation and/or use, refer to the
instruction manual provided with the child seat.
fig. 91 F0W0016
100
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX