FIAT Panda User Manual

Page 14

MENU ITEMS

Menu
This item allows you to access the Setup Menu. Press
the

fig. 7 button to select the various

Menu items. Hold down the

button to return to

the standard screen.
Lighting (Interior car lighting adjustment)
(with side lights on only)
With the side lights on, this function is used to set
the brightness of the instrument panel, radio
controls and automatic climate control system
controls (for versions/markets, where provided) to 8
levels.
To adjust the brightness, proceed as follows:
press the

button briefly: the previously set level

will flash on the display;
press the

button to adjust the brightness

level;
press the

button briefly to return to the menu

screen or hold the button down to return to the
standard screen without storing.
Speed Beep (Speed limit)
This function is used to set the car speed limit (km/h
or mph); the driver is alerted when this limit is
exceeded.
To set the desired speed limit, proceed as follows:
❒ briefly press the button: the display will show

the text (Speed Beep);

❒ press the

button to select speed limit

activation (On) or deactivation (Off );

❒ if the function is on, press

to select the

desired speed limit and then press

to confirm.

Note Setting is possible between 30 and 200 km/h,
or 20 and 125 mph, according to the previously
set unit. See the "Measurement unit adjustment
(Measurement unit)" paragraph described below. The
setting will increase/decrease by 5 units each time
the

button is pressed. Hold down the

button to automatically increase/decrease

the setting rapidly. Complete the adjustment with
single presses of the button when you approach the
desired value.
❒ press the button briefly to return to the menu

screen or hold the button down to return to the
standard screen without storing.

To cancel the setting, proceed as follows:
❒ press the button briefly: "On" will flash on the

display;

❒ press the

button: "Off" will flash on the

display;

❒ press the button briefly to return to the menu

screen or hold the button down to return to the
standard screen without storing.

Activation/Trip B data (Activating Trip B)
With this function it is possible to activate ("On") or
deactivate ("Off") the Trip B display (partial trip).
For more information see the "Trip computer"
paragraph.

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX