FIAT Panda - Manual (Page 229)

SPEED VOLUME function
(speed-based volume change)
This function automatically adapts the volume level
to the speed of the car, increasing the volume when
the speed increases to maintain the ratio with the
noise level inside the passenger compartment.
To turn the function on/off, press the
/ buttons.
The words "Speed volume" appear on the display,
followed by the current status of the function:
❒ Off: function deactivated
❒ Low: function activated (low setting)
❒ High: function activated (high setting).
RADIO ON VOLUME function
(maximum radio volume limit
activation/deactivation)
This function makes it possible to activate/deactivate
the maximum volume limit when the radio is turned
on.
The display shows the function status:
❒ "Radio on vol – Limit on": when the radio is
switched on, the volume level will be: – if the
volume level is equal to or higher than the
maximum value, the radio will come on at the
maximum volume;
– if the volume level is between the minimum and
maximum values, the radio will come on at the same
volume as before it was switched off
– if the volume level is equal to or lower than the
minimum value, the radio will come on at the
minimum volume.
❒ "Radio on vol – Limit off": the radio will come on
at the volume level it was at before switching off.
The volume level can be between 0 and 40.
To change the setting of the selected function, use
the
/ buttons.
NOTES
❒ Using the Menu it is only possible to adjust the
activation/deactivation of the function and not the
minimum or maximum volume value.
❒ If the "TA" or "TEL" functions or an external audio
source are activated when the radio is turned on,
the radio will come on at the volume set for these
sources. The volume can be adjusted between the
minimum and the maximum level, by deactivating
the external audio source.
❒ If the battery charge is low, it will not be possible
to adjust the volume between the minimum and
maximum levels.
225
SOUND-S
YSTEM