FIAT Grande Punto Actual - Manual (Page 155)

154
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
CHANGING
AN INTERIOR BULB
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT CEILING LIGHT
(for versions/markets, where provided)
Proceed as follows to replace the bulbs:
❒ manipulate the points shown by the ar-
rows and remove the light D-fig. 30;
❒ open the protective flap E-fig. 31;
❒ replace bulb F-fig. 33 by releasing it
from the side contacts and making sure
that the new bulb is correctly clamped
between these contacts;
❒ close the protective flap E-fig. 31 and
secure light D-fig. 30 into its housing
making sure that it locks into place.
FRONT CEILING LIGHT
WITH SPOT LIGHTS
(for versions/markets, where available)
Proceed as follows to replace the bulbs:
❒ manipulate the points shown by the
arrows and remove light A-fig. 32;
❒ open the protective flap B;
❒ replace bulbs C-fig. 33 by releasing
them from the side contacts and mak-
ing sure that new bulbs are correctly
clamped between these contacts;
❒ close the lid B-fig. 33 and secure light
A-fig. 32 into its housing making sure
that it locks into place.
fig. 32 F0M0213m
fig. 33 F0M0234m
fig. 30 F0M0214m
fig. 31 F0M0235m
135-166 ACTUAL 2ed EN 30-04-2010 12:39 Pagina 154