FIAT Grande Punto Actual - Manual (Page 139)

138
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
To change a wheel proceed
as follows:
❒ stop the car where it is not a danger to
other road users and you can replace
the wheel safely. The ground should be
flat and solid;
❒ turn the engine off and pull up the hand-
brake.
❒ engage first gear or reverse;
❒ wear the reflective safety jacket (com-
pulsory by law in certain countries) be-
fore getting out of the car;
❒ open the boot and lift the carpet or re-
move the cargo box (for versions/mar-
kets, where provided);
❒ unscrew the locking device A-fig. 2;
❒ take out the tool container C-fig. 2 and
put it alongside the wheel to be
changed;
❒ take out the spare wheel B-fig. 2;
fig. 2 F0M0188m
Important notes:
❒ the jack weight is 1.76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired. If it breaks
it must be replaced with a new jack;
❒ no tool other than its cranking device
may be fitted on the jack.
135-166 ACTUAL 2ed EN 30-04-2010 12:39 Pagina 138