FIAT Grande Punto Actual User Manual

Page 147

146

SAFETY

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

SER

VICE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

CONTROLS AND DEVICES

IN AN

EMERGENCY

❒ if you get a pressure reading of at least

1.8 bar, restore the proper pressure
(with engine running and handbrake on)
and restart;

❒ drive with the utmost care to the near-

est Fiat Dealership.

FOR CHECKING AND
RESTORING PRESSURE ONLY

The compressor may also be used for
restoring pressure only. Release the fast
coupling and connect it directly to the tyre
valve fig. 13; in this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.

CYLINDER REPLACEMENT
PROCEDURE

To replace the cylinder, proceed as fol-
lows:
❒ disconnect A-fig. 14;
❒ turn the cylinder anticlockwise to lift

it out;

❒ insert the new cylinder and turn it

clockwise;

❒ connect A to the cylinder and fit the

transparent tube B into its allocated
space.

Remember to inform the
workshop that the tyre has

been treated with a quick repair kit.
Give the instruction booklet to the
personnel charged with handling the
treated tyre.

WARNING

fig. 13

F0M0365m

fig. 14

F0M0206m

135-166 ACTUAL 2ed EN 30-04-2010 12:39 Pagina 146