FIAT Grande Punto Actual User Manual

Page 153

152

SAFETY

TING

AND DRIVING

ARNING

LIGHTS AND MESSAGES

SER

VICE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

CONTROLS AND DEVICES

IN AN

EMERGENCY

To change the bulb proceed as follows:
❒ open the boot then loosen the two fas-

tening screws A;

❒ disconnect the central electric connec-

tor and pull the lens unit outwards;

❒ loosen the screws E and remove the

bulb holder;

❒ remove the bulb that needs replacing

B, C or D by pushing it in slightly and
turning it anti-clockwise (“bayonet”
clamping), then replace it;

❒ refit the bulb holder and tighten the

screws E;

❒ reconnect the electric connector, cor-

rectly realign the unit with the car body
and then tighten the fastening screws A.

REAR FOG LIGHTS fig. 24

Contact a Fiat Dealership to have bulbs
for the rear fog lights A replaced.

REVERSE LIGHTS fig. 25

Contact a Fiat Dealership to have bulbs
for the reverse lights A replaced.

fig. 24

F0M0208m

fig. 25

F0M0209m

fig. 23

F0M0185m

135-166 ACTUAL 2ed EN 30-04-2010 12:39 Pagina 152