FIAT 500 - Manual (Page 142)

CHANGING AN INTERIOR LIGHT
For the type of bulb and power rating, see “Changing
a bulb".
PLAFONIERA INTERNA
To change the bulbs, proceed as follows:
❒ using the screwdriver provided, extract the roof
light A fig. 120 working in the point shown by
the arrow;
❒ open the cover fig. 121 as indicated;
❒ replace the bulb C fig. 121 releasing the side
contacts, insert the new bulb and make sure that it
is correctly locked between the contacts;
❒ close the cover and refit the lens.
BOOT LIGHT
(for versions/markets, where provided)
To change the bulbs, proceed as follows:
❒ open the tailgate;
❒ using the screwdriver provided, extract the ceiling
light A fig. 122 working in the point shown;
❒ open the bulb cover B fig. 123 and replace the
pressure-fitted bulb C fig. 123;
❒ refit the cover B on the lens;
❒ refit the roof light correctly by pressing one side
and then the other until the locking click is heard.
fig. 120 F0S0060 fig. 121 F0S0356
141
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX