FIAT 500 - Manual (Page 137)

REPLACING EXTERIOR BULBS
For the type of bulb and power rating, see “Changing
a bulb".
FRONT LIGHT CLUSTERS
The front light clusters contain sidelight, dipped
beam, main beam and direction indicator bulbs.
Operating from the engine compartment remove the
rubber cap A fig. 109 to access the direction
indicator bulbs; remove the rubber cap B fig. 109 to
access the dipped headlight bulbs.
To access the bulbs of the side lights/day lights and of
the main beams, after fully steering the wheels,
open the guard door C fig. 110 on the wheel arch at
the level of the lights, then remove the rubber cap
D fig. 110.
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ turn the bulb holder A fig. 111 anticlockwise and
remove it;
❒ remove the pressure-fitted bulb and replace it;
❒ refit the bulb holder A by turning it clockwise and
locking it correctly;
❒ refit the rubber cap.
fig. 109 F0S0050 fig. 110 F0S0051
136
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX