RIDGID MONSTER BOX - Manual (Page 3)

Keep hands clear when closing box lid or doors. Hands or fingers could be crushed by the weight of the cover or
doors
Incorrect use of this product can lead to accidental injury or even death; follow all recommended guidelines when using.
• Read & understand all instructions & warnings before operating or using this product.
• Print out the warning labels in your local language and stick them on the correct place in the box
• DO NOT put fuels, flammables, explosives, or hazardous materials inside these products.
• Gasoline, solvents, gunpowder, or other munitions, dynamite, propane, acetylene or other such products can
explode if stored inside these products. Volatile liquids can leak and catch fire when heated in containers by sun
causing burns, injury, or death.
• Use these storage products ONLY for storing and transporting electric tools or hand tools & equipment.
• Failure to follow these warnings or modifications or other uses of these products could result in death, serious
injury, or property damage.
• Any modification or unintended use of this product shall immediately void all manufacturer’s warrantees.
• Manufacturer disclaims all liabilities for injuries to persons or property resulting from any modifications to, or
unintended use of this product.
MONSTER BOX™ Job Site Storage Equipment for professional use is intended to provide superior storage security for
your tools and equipment on the job site. It is configured with lifting rings to allow movement by crane with appropriate
rigging and safety precautions. The storage units are rated for 2500 lbs /1.100 kg. capacity (including the weight of the
storage container). The MONSTER BOX line is also configured to enable a power cord pass through.
DANGER
NOTICE
INSTRUCTION AND REPAIR PARTS MANUAL
MODELS 1000, 1010, & 1020
1. Remove the tear off section from the PRODUCT REGISTRATION label inside your MONSTER BOX and attach it
to this manual in the space provided below. Read and save this manual in a secure place.
2. It is important to register your key code upon purchase or upon changing lock cylinders to key your boxes alike.
Failure to register your key code could result in an inability to unlock your box. As a premium secure solution for
tool storage, there is a possiblity that if your keys are lost or misplaced that unless regestered, you will not be able
to enter your box.
3. RIDGID will only sell additional or replacement keys to the registered owner of the serial # on the product.
4. Insert tear-off section from registration decal in the space provided below.
5. To register your KEY CODE, do the following:
Register on-line at www.ridgid.eu/jobsitestorage
INSERT TEAR OFF SECTION FROM PRODUCT REGISTRATION
Write your Key Code here:
____________________________
Keep this manual in a secure place.
Register your Product and Key Code
WARNING
1