Microlife AG1-10 - Manual (Page 13)

hear irregular pulses on several occasions, please consult your doctor.
You must consult your specialist dealer or chemist if there are technical problems with the blood
pressure instrument. Never attempt to repair the instrument yourself!
Any unauthorised opening of the instrument invalidates all guarantee claims!
6. Care and maintenance, recalibration
With proper care and maintenance, this blood pressure measuring device will provide years of
satisfactory service. Follow the general Rules below:
• Do not drop.
• Never inflate beyond 300 mmHg.
• Do not expose the device to either extreme temparatures, humidity, or direct sunlight.
• Never contact the cuff fabric with a sharp instrument, since this could cause damage.
• Always deflate cuff completely before storage.
• Do not dismantle manometer under any circumstance.
• Store the whole device in storage bag provided, to keep all the parts clean.
• Storage temperature condition: ­20 °C to +70 °C at a relative air humidity of 85 % (non­
condensing).
• Wipe off the manometer and bulb with a damp cloth. Sterilization is not necessary, since the
parts of manometer should not come into direct contact with the patient‘s body during
measurement.
• Remove the bladder first, and wipe the closer, bladder and tubes with a damp cloth. The cuff can
be washed with soap and cold water. But do rinse the cuff with clear water and keep it air dry.
Periodical recalibration
Sensitive measuring devices must from time to time be checked for accuracy. We therefore
recommend a periodical inspection of the static pressure display every 2 years.
Your specialist dealer would be pleased to provide more extensive information about this.
7. Guarantee
This blood pressure monitor is guaranteed for 2 years from date of purchase. This guarantee
includes the instrument and the cuff. The guarantee does not apply to damage caused by
10