Edimax Technology PS-1210MFn - Manual (Page 77)

72
8.4.2 Wireless
If you want to use the MFP Server through wireless LAN, please
set up the MFP Server through Ethernet first and make sure your
wireless LAN setting is correct. After setting the wireless LAN,
unplug the Ethernet cable and restart the MFP Server, then you
can start to use the MFP Server through wireless LAN. If the
wireless configuration does not work, please plug the Ethernet
cable again, restart the MFP Server and configure the MFP Server
through Ethernet until the wireless LAN settings are correct.
You can enable/disable the wireless function and set up the
wireless parameters for the MFP Server from here. The
parameters include “Function”, “Mode”, “ESSID” and “Channel
Number”. You can manually set the wireless network that you want
to connect in this page or use the “Site Survey” function to
automatically search for an available wireless network and
associate with it.