Edimax Technology PS-1210MFn - Manual (Page 130)

125
2. Add an entry to the host’s /etc/bootptab file, similar to the
following:
hostname:\
:ht=1:\
:ha=MFP_Server_ethernet_address:\
:ip=MFP_Server_ip_address:
Lines should be indented with tabs.
Where hostname is the device name of a MFP Server, the ht=1 tag
specifies the hardware type is Ethernet, the ha= tag specifies the
Ethernet address of a MFP Server, which is the Node ID located
on the MFP Server. The ha tag must be preceded by the ht tag.
The ip= tag should correspond to the IP address you want to
assign to the MFP Server.
For example, a MFP Server with the following configuration:
Node ID: 0000B4010101 (this implies Ethernet address is
0000B4010101),
IP address: 203.66.191.12
The entry for this MFP Server in the /etc/bootptab file should be:
MF010101:\
:ht=1:\
:ha=0000B4010101:\
:ip=203.66.191.12: