Edimax Technology PS-1210MFn - Manual (Page 57)

52
7.8 Wireless Configuration
If you want to use the MFP Server through wireless LAN, please
set up the MFP Server through Ethernet first and make sure your
wireless LAN setting is correct. After setting the wireless LAN,
unplug the Ethernet cable and restart the MFP Server, then you
can start to use the MFP Server through wireless LAN. If the
wireless configuration does not work, please plug the Ethernet
cable again, restart the MFP Server and configure the MFP Server
through Ethernet until the wireless LAN settings are correct.
The default settings of the MFP Server wireless function are as
follows.
y Mode: Ad Hoc
y SSID: Default
y Channel: 11