Edimax Technology EW-7238RPD User Manual
Page 15
15
Note:
When assigning a static IP address to the
wireless extender, you need to ensure that you assign
an IP address in the same subnet as your network. For
example, if your static IP is 192.168.9.2 then you need
to assign the wireless extender an IP address in the
range 192.168.9.x where x = 3 – 254. Please refer to
IV-1. Configuring your IP address
for more
information.
Note:
To ensure that you assign a correct IP address to
the wireless extender, you can check the IP address of
your computer and/or router. Please refer to
How to Modify the IP Address of Your PC or Macintosh
IV-1-4. How to Find Your Router’s IP Address
for
guidance on how to do so. Your ISP can also provide
you with such information as IP address, subnet mask
and gateway address.
10. Please wait while the device restarts.
Note:
After the system has restarted, if you do not see
the congratulations screen in Step 11, then please skip
straight to step 12.
Typically, this may occur for smartphone users who
setup the extender via a wireless connection (as
shown in II-1. iQ Setup 2.ii). It is likely that after the
extender restarted, your smartphone re-connected to
the Edimax.Setup SSID which is now, upon completion
of setup, redundant.