3Com 16 Plus - Manual (Page 21)

21
WARNING: Warnings contain directions that you
must follow for your personal safety. Follow all
directions carefully.
You must read the following safety information
carefully before you install or remove the unit:
■ Exceptional care must be taken during installation and
removal of the unit.
■ Only stack the Switch with other OfficeConnect units.
■ To ensure compliance with international safety standards,
only use the power adapter that is supplied with the
unit.
■ The socket outlet must be near to the unit and easily
accessible. You can only remove power from the unit by
disconnecting the power cord from the outlet.
■ This unit operates under SELV (Safety Extra Low Voltage)
conditions according to IEC 950. The conditions are only
maintained if the equipment to which it is connected
also operates under SELV conditions.
■ There are no user-replaceable fuses or user-serviceable
parts inside the Switch. If you have a physical problem
with the unit that cannot be solved with problem solving
actions in this guide, contact your supplier.
■ Disconnect the power adapter before moving the unit.
WARNING: RJ-45 ports. These are shielded RJ-45
data sockets. They cannot be used as telephone
sockets. Only connect RJ-45 data connectors to these
sockets.
I
MPORTANT
S
AFETY
I
NFORMATION