3Com 09-1457-000 - Manual (Page 14)

4 C HAPTER 1: I NSTALLING THE LAN PC C ARDS
You may see prompts for driver installation. Go to Chapter 2
to install the network driver that allows you to login to the
network.
Connecting the 3CXE589ET PC Card
1 Remove all PC Cards from your notebook and turn it on.
2 Insert one RJ-45 connector on the network cable ➀
into the 3CXE589ET PC Card XJACK ® connector.
Figure 4 Connecting the 3CXE589ET PC Card
3 Insert the other RJ-45 connector into the network
port ➁ .
4 Insert the PC Card into the PC Card slot ➂ and slide it
all the way in.
CAUTION: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
You may see Windows prompts for driver installation.
Go to Chapter 2 to install the network driver that allows
you to login to the network.