3Com 09-1457-000 - Manual (Page 13)

Connecting the 3CCE589EC PC Card 3
Connecting the 3CCE589EC PC Card
1 Remove PC Cards from your notebook and turn it on.
2 If you are using the RJ-45 connector, connect the PC
Card COMBO cable to the 3CCE589EC PC Card.
a Connect one RJ-45 connector on the network cable to
the PC Card COMBO cable.
b Insert the other RJ-45 connector into the network port.
c Insert the PC Card into the PC Card slot and slide it all
the way in.
You may see prompts for driver installation.
d Go to Chapter 2 to install the network driver that allows
you to login to the network.
3 If you are using the BNC T-connector, connect the PC
Card COMBO cable ➀ to the 3CCE589EC PC Card.
a Connect the BNC T-connector to the PC Card COMBO
cable
➁ .
You must supply your own BNC T-connector.
Figure 3 Connecting the 3CCE589EC PC Card
b Connect the BNC T-connector to the Ethernet cable ➂ .
c Insert the PC Card into the PC Card slot ➃ and slide it all
the way in.
CAUTION: Do not force the PC Card into the slot or you
may bend the pins inside the slot.