Printable area, Scanning, Supported memory cards – Epson RX500 Parts User Manual
Page 3: Memory card image file requirements, Epson stylus photo rx500
![background image](/manuals/231517/3/background.png)
EPSON Stylus Photo RX500
10/03
EPSON Stylus Photo RX500
- 3
Printable Area
Margins
Standard sheets
Top (A): 0.12 inch (3.0 mm)
Left (B-L): 0.12 inch (3.0 mm)
Right (B-R): 0.12 inch (3.0 mm)
Bottom (C): 0.12 inch (3.0 mm)
Sheets copied with
minimum margin
setting
Top (A): 0.06 inch (1.5 mm)
Left (B-L): 0.06 inch (1.5 mm)
Right (B-R): 0.06 inch (1.5 mm)
Bottom (C): 0.06 inch (1.5 mm)
Envelopes
Top (A): 0.12 inch (3.0 mm)
Left (B-L): 0.12 inch (3.0 mm)
Right (B-R): 0.12 inch (3.0 mm)
Bottom (C): 0.78 inch (20 mm)
Note:
Depending on the type of paper, the print quality may deteriorate in
the top and bottom areas of the print, or these areas may be
smeared. Before printing large jobs using an extended margin setting,
print a single sheet to confirm print quality.
You can create borderless prints using certain special EPSON papers.
See the User’s Guide for more information.
Scanning
Scanner type
Flatbed color image scanner
Photoelectric device
Color CCD line sensor
Effective pixels
20,400
× 28,080 pixels at 2400 dpi,
100%
Document size
Letter (8.5 × 11.0 inches) or A4
(8.5 × 11.7 inches); reading area is
selectable with software
Scanning resolution
2400 dpi (main), 4800 dpi (sub)
Output resolution
50 to 6400 dpi (adjustable in one-dpi
increments; resolutions higher than
4800 are interpolated by software)
Color separation
RGB color filters on CCD
Image data
16 bits per pixel per color input
1 to 16 bits per pixel per color output
48 bits total
Gamma correction
User defined 2 level
Light source
White cold cathode fluorescent lamp
Interface
USB 2.0 High Speed
Supported Memory Cards
Slot A
Memory Stick
®
Memory Stick PRO
MagicGate Memory Stick
SD (Secure Digital) Card
MMC (MultiMediaCard)
Memory Stick Duo
miniSD Card (adapter required)
Slot B
SmartMedia
™
(maximum 128MB;
standard 2000 compliant)
xD-Picture Card
Slot C
CompactFlash
™
Type I and Type II
IBM
®
Microdrive
™
Memory Card Image File Requirements
File format
JPEG or TIF format image files,
DOS FAT taken with a DCF
version 1.0 compliant digital camera
(supports Exif Print v. 2.1 and 2.2)
Media format
DCF (Design rule for Camera File
system) version 1.0 compliant*
Image size
Vertical: 120 to 4600 pixels
Horizontal: 120 to 4600 pixels
Number of files
Up to 999
*
The DCF standard is set by the Japan Electronics and Information Technology
Indistries Association (JEITA)
Note:
You can’t print images whose file names contain double-byte
characters.
A
B-L
B-R
C
Single sheets or cards
Envelopes
Slot B
Slot A
Memory
card light
Slot C