3Com NBX 900-0208 - Manual (Page 23)

Status Lights for Access Buttons 23
Access buttons have these default settings, which your administrator can
change:
1 Headset / Handset Select button — Toggles audio between a headset
that is connected to the telephone and the handset. See “Using a
Headset” in Chapter 5 .
2 Speed Dial button — Typically, you can use these 7 buttons (2-8) for
personal speed dial settings, although the administrator can map them to
other features. See
“Speed Dials” in Chapter 5 .
3 Speed Dial button
4 Speed Dial button
5 Speed Dial button
6 Speed Dial button
7 Speed Dial button
8 Speed Dial button
Status Lights for
Access Buttons An Access button that is set up for incoming and outgoing calls is called a
System Appearance button. The light beside each System Appearance
button indicates the status:
Display Panel Use the 3Com Manager’s Telephone display panel to dial numbers and
manage calls. Navigate and choose telephone features displayed on the
panel with the soft buttons for tabs across the bottom of the display, the
left buttons for call control or list selection, the right buttons for actions
on corresponding calls or list selection, and the scroll and select buttons.
■
Soft buttons — activate the tabbed commands that display above
them. The commands change according to context. Much of the time
the soft buttons give you access to messages, directories, call logs,
and feature dialogs. One soft button, for example, is the Messages
button.
If the light is The line is
Off Available for use
Steady In use
Blinking quickly Ringing
Blinking slowly On hold