2nd Ave. DVPDNET-SL DeviceNet Network Scanner DVP-0204520-02 - Manual (Page 13)

DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Operation Manual 11
(3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address,
baud rate and communication format.
Item Function Default
COM Port
COM port on the PC to be used to communicate with
DVP-SV
COM1
Address Communication address of DVP-SV 01
Baud rate Communication speed between the PC and DVP-SV 9,600 (bps)
Data Bits 7
Parity Even Parity
Stop Bit
Communication protocol between the PC and DVP-SV
1
Mode Communication mode between the PC and DVP-SV ASCII
Click on “OK” and return to the main page.
(4) Select “Network” => "Online”, and the “Select Communication Channel” dialog box will appear.