Yamaha HTR-6180 - Manual (Page 66)

62
En
XM Satellite Radio tuning
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
on page 61.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on
page 60 for details.
2
Press F
MEMORY (or 9MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
You must proceed to and carry out steps 3 through 4 while
the MEMORY indicator is flashing in the front panel
display.
3
Press E
PRESET/TUNING/CH l / h
(or 8
PRESET/CH k / n) repeatedly to select
a preset channel group and number (A1 to
E8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
y
You can select the preset station group (A to E) by pressing
DA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly.
4
Press F
MEMORY (or 9MEMORY) to set
the selected XM Satellite Radio channel as a
preset channel while the MEMORY indicator
is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE and then
press 4XM.
Setting the XM Satellite Radio
preset channels
Note
043 XMU
Currently selected channel number
MEMORY
Flashes
Note
MEMORY
C5 043 XMU
Selected preset channel group and number
Flashes
C5:043 XMU
Colon (:)