Yamaha HTR-6180 - Manual (Page 64)

60
En
XM Satellite Radio tuning
Once you have installed the XM Mini-Tuner Dock,
inserted the XM Mini-Tuner, connected the XM Dock to
your XM Ready
® home audio system, and installed the
antenna, you are ready to subscribe and begin receiving
XM programming. There are three places to find your
eight character XM Radio ID: On the XM Mini-Tuner, on
the XM Mini-Tuner package, and on XM Channel 0.
Record the XM Radio ID in the following eight squares
for reference.
The XM Radio ID does not use the letters “I”, “O”, “S” or “F”.
Activate your XM Satellite Radio service in the U.S. online at
http://activate.xmradio.com/ or call 1-800-XM-RADIO (1-800-
967-2346). Activate your XM Satellite Radio service in Canada
online at https://activate.xmradio.ca/ or call 1-877-GET-XMSR
(1-877-438-9677). You will need a major credit card. XM will
send a signal from the satellites to activate the full channel lineup.
Activation normally takes 10 to 15 minutes, but during peak busy
periods you may need to keep your XM Ready home audio
system on for up to an hour. When you can access the full lineup
on your XM Ready home audio system you are done.
1
Rotate the R
INPUT selector (or press
4 XM) to select “XM” as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display and the XM Satellite Radio
information (such as channel number, channel name,
category, artist name, or song title) for the currently
selected channel appears in the front panel display.
y
When you select “XM” as the input source, this unit
automatically recalls the previously selected channel.
• The XM Satellite Radio signals cannot be output at the
AUDIO OUT (REC) jacks.
• If a status message or an error message appears in the front
panel display or in the OSD, see the “XM Satellite Radio”
section in “Troubleshooting” on page 113 for appropriate
remedies.
2
Search for a channel by using one of the XM
Satellite Radio search modes.
• To select a channel from the all channel list, see
“All Channel Search mode” on page 61.
• To select a channel by category, see “Category
Search mode” on page 61.
• To select a channel from the preset channels, see
“Preset Search mode” on page 61.
• To select the desired channel directly by entering
the channel number, see “Direct number access
mode” on page 61.
y
• You can use the Neural Surround decoder to enjoy the XM HD
surround sound content of the XM Satellite Radio broadcasts in
multi-channels (see page 80).
• You can set the XM Satellite Radio preset channels (see
page 62).
• You can display the XM Satellite Radio information in the front
panel display or in the OSD (see page 63).
Activating XM Satellite Radio
Note
Basic XM Satellite Radio
operations
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE.
Notes
MULTI CH VCR DVR V-AUX DTV/CBL DVD CD MD/CD-R TUNER PHONO SIRIUS XM
001 Preview
Lights up