Yamaha HTR-6180 - Manual (Page 45)

41
En
Selecting the SCENE templates
BA
S
IC
OPERA
T
ION
English
■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 104).
1
Press the desired A
SCENE button on the
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
* These buttons control the input source component. See
page 103 for details of the function of each button.
■ Setting the input source of the
customized SCENE template on the
remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
1
Press the desired A
SCENE button on the
remote control.
2
Press and hold the A
SCENE button and the
desired input selector button (4).
The BTRANSMIT indicator flashes twice.
3
Keep holding down the buttons pressed in
step 2 until the B
TRANSMIT indicator
flashes twice again.
If the setting of the input source is not successful, the
B
TRANSMIT indicator flashes repeatedly. In this case, repeat
the setup procedure.
Using the remote control for the SCENE feature
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE.
Note
REC
SCENE
1 2 3 4
VOLUME TV VOL TV CH
AMP
SOURCE
TV
TRANSMIT CODE SET
STANDBY POWER POWER POWER
AV TV
DOCK CBL
PHONO
MUTE TV MUTE TV INPUT
4 3 2 1
8
10
7
0 9
6 5
SLEEP
SUR. DECODE ENHANCER PROG
ENT
PARAMETER STRAIGHT PURE DIRECT
AUDIO SEL MULTI CH IN
MENU TITLE
SET MENU
SRCH MODE
MEMORY
LEVEL
DISPLAY RETURN
BAND
A-E/CAT.
ENTER
PRESET/CH
TUNER XM
CD CD-R
DVD
V-AUX
DVR VCR
DTV
MD
A
INFO PRG SELECT
SIRIUS
Set to
SOURCE
SCENE
buttons
*
Note