Yamaha HTR-6180 - Manual (Page 35)

31
En
Connections
PRE
P
ARA
T
ION
English
D SP A B indicators
Light up according to the set of front speakers activated
(see page 43).
SP A:
The FRONT A speakers are activated.
SP B: The FRONT B speakers are activated.
SP A B: The FRONT A and FRONT B speakers are
activated.
E ZONE2 indicator
Lights up when Zone 2 is turned on (see page 107).
F DSP indicators
The respective indicator lights up when any of the sound
field programs are selected (see page 48).
CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound
field program (see page 48).
VIRTUAL indicator
Lights up when the Virtual CINEMA DSP mode is
active (see page 51).
SILENT CINEMA indicator
Lights up when headphones are connected and a
sound field program is selected (see page 51).
G Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.
H SLEEP indicator
Lights up while the sleep timer is on (see page 47).
I Input channel and speaker indicators
Input channel indicators
• Indicate the channel components of the current
digital input signal.
• Light up or flash according to the settings of the
speakers when this unit is in the automatic setup
procedure (see page 32) or in the “BASIC MENU”
in “MANUAL SETUP” (see page 89).
Presence speaker indicators
Light up or flash according to the setting of “EXTRA
SP ASSIGN” when this unit is in the automatic setup
procedure (see page 32) or in the “BASIC MENU” in
“MANUAL SETUP” (see page 87).
y
You can make settings for the presence and surround back
speakers automatically by running “AUTO SETUP” (see
page 32) or manually by adjusting settings for “SUR.B L/R
SP” (see page 88) in “SPEAKER SET”.
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Infrared window (1)
Outputs infrared control signals. Aim this window at the
component you want to operate.
B TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
Operation mode selector (F)
The function of some buttons depends on the operation
mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 103).
TV
Operates the TV assigned to either 4DTV/CBL or
4PHONO (see page 102).
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
• To set the remote control codes for other components, see
page 104.
Input channel indicators
LFE
L L C R
SL SB SR
SBR SBL
LFE indicator
Presence speaker indicators
Using the remote control
Notes
30 30 Approximately 6 m (20 ft)
Remote control sensor