Xerox 4151 - Manual (Page 36)

Installing the Printer Driver and Software
28
3
Setting up the PPD file
Preparation
Confirm that the printer is connected to an AppleTalk network before per-
forming the following procedure.
AAAA
On the Apple menu, select [Chooser].
BBBB
Click the [LaserWriter 8] icon.
CCCC
In the [Select a PostScript Printer] list, click to select the name of the printer
you want to use.
DDDD
Click [Create].
EEEE
Click to select the printer you want to use, and then click [Select].
The PPD file is set up, and the LaserWriter 8 icon appears at the left of the
printer name on the list. Next, follow the procedure on p.28 “Setting up op-
tions” to make the option settings, or close the [Chooser] dialog box.
Setting up options
AAAA
On the Apple menu, select [Chooser].
BBBB
Click the [LaserWriter 8] icon.
CCCC
In the [Select the PostScript Printer] list, click to select the name of the printer
you want to use, and then click [Setup].
DDDD
Click [Configure].
A list of options appears.
EEEE
Select the option you want to set up and select the appropriate setting for it.
Note
❒ If the option you want to set up does not appear, the PPD file has not been
set up correctly. Check the name of the PPD file shown in the dialog box.
FFFF
Click [OK].
The list of options closes.
GGGG
Click [OK].
The [Chooser] dialog box appears.
HHHH
Close the [Chooser] dialog box.
KirC-P1DXP-GB_F_FM.book Page 28 Friday, February 8, 2002 2:13 PM