Xerox 4151 - Manual (Page 22)

Configuring the Printer for the Network
14
2
GGGG
Set the IP Address with the
0 0 0 0 or
1 1 1 1key and the number keys.
Note
❒ To get the IP Address for the
printer, contact your network
administrator.
A Type the first three digits of the
IP Address, and the pointer
moves to the next entry field au-
tomatically.
Note
❒ 1 key : Press to go to the next
entry field.
❒ 0 key : Press to go back to
the previous entry field.
The following screen appears
on the panel display.
Repeat these procedures to
complete the IP Address set-
ting.
Note
❒ {{{{OK}}}}: Press to set the new
settings and return to the
previous menu.
❒ {{{{Cancel}}}}: Press to return to
the previous menu without
changing any data.
B Press
{{{{OK}}}}.
The following screen appears
on the panel display for two sec-
onds.
The setting of the IP Address is
completed. Then return to the
previous screen.
HHHH
Press the
0 0 0 0 or 1 1 1 1key to display
“Subnet Mask”and "Gateway Ad-
dress", then set "Subnet Mask"
and "Gateway Address" follow-
ing the same procedure for setting
the IP Address, if necessary.
- - - -Address
❖ ❖ ❖ ❖ Subnet Mask
A number used to mathematically
"mask" or hide an IP Address on
the network by eliminating those
parts of the address that are alike
for all the machines on the net-
work.
❖ ❖ ❖ ❖ Gateway Address
A gateway is a connection or inter-
change point that connects two
networks. A gateway address is for
the router or host computer used
as a gateway.
Note
❒ To get the addresses, contact
your network administrator.
KirC-P1DXP-GB_F_FM.book Page 14 Friday, February 8, 2002 2:13 PM