Xerox 4151 - Manual (Page 19)

Connecting the Machine
11
1
Indicators on the optional Network Interface Board
1. Indicator (green)
Is on when the power of the machine is
on and on while the machine is in a net-
work environment.
2. Indicator (orange)
Is blinking while the machine is receiving
print jobs over the network environment
and off when the print jobs have been
sent to the controller.
- - - -Status page
The status page of Network Interface Board will be automatically printed in the
following cases:
• when the printer is turned on.
• when Network Interface Board is reset.
This feature can be disabled with NIB Setup Tool which is included in the Smart-
NetMonitor for Admin program folder.
To disable this feature, check [Property Sheet] in the "NIB Setup Tool" screen.
Click [Detailed...] in the [General] tab and remove the check from the box for "Print
configuration page on start up".
ZENS550E
KirC-P1DXP-GB_F_FM.book Page 11 Friday, February 8, 2002 2:13 PM