ZyXEL Communications DMA-1000 Series - Manual (Page 63)

Chapter 9 Configuring the DMA
DMA-1000 Series User’s Guide
63
Figure 34 OPTION > Audio Output Settings
The following table describes the fields in this menu.
Table 17 OPTION > Audio Output Settings
LABEL DESCRIPTION
Analog Output The DMA sends two channel (also called left and right or stereo) audio output
through the LEFT and RIGHT audio connectors for music files.
S/PDIF Output Use this column to turn the S/PDIF connector’s output (the DMA’s digital output) on
or off for individual audio formats.
AAC Select whether or not the DMA sends digital audio output through the S/PDIF audio
connector for AAC music files.
Select LPCM to turn on the channel digital output (also called left and right or
stereo) for AAC music files.
Select OFF to turn off the digital output for AAC music files.
Dolby Digital Select whether or not the DMA sends digital audio output through the S/PDIF audio
connector for Dolby Digital music files.
Select LPCM to turn on the channel digital output (also called left and right or
stereo) for Dolby Digital music files.
Select OFF to turn off the digital output for Dolby Digital music files.
WMA Select whether or not the DMA sends digital audio output through the S/PDIF audio
connector for WMA music files.
Select LPCM to turn on the channel digital output (also called left and right or
stereo) for WMA music files.
Select OFF to turn off the digital output for WMA music files.
Auto Volume
Control Strength Automatic volume control averages the volume during music playback to help
smooth out the sound level. Select the amount of volume smoothing you want for
music playback.
None provides no volume smoothing.
Small provides a low degree of volume smoothing.
Moderate provides some volume smoothing.
Strong provides the greatest degree of volume smoothing.
OK Select this to save your changes back to the DMA.
CANCEL Select this to exit this screen without saving your changes.