ZyXEL Communications DMA-1000 Series - Manual (Page 109)

Appendix C Setting up Your Computer’s IP Address
DMA-1000 Series User’s Guide
109
Figure 68 Macintosh OS X: Network
4 For statically assigned settings, do the following:
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your DMA in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your DMA and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.