Zebra Technologies XiIII - Manual (Page 82)

Error Condition Head Open
Error Condition Head Element Bad
Warning Ribbon In
Warning Head Too Hot
76 Zebra XiIII-Series User’s Guide
Problem Solution
The printhead is not fully closed. Close the printhead.
Problem Solution
One or more of the printhead elements
have failed the printhead element test.
If the failed elements impact your printing application,
replace the printhead. To override this error , disable
the head test count feature on the front panel by
defaulting the value to “0000.” See page 59.
Problem Solution
The ribbon is loaded.
Remove the ribbon and set the printer to direct thermal
mode.
Ensure that the printer driver and/or software settings
are correctly set (if applicable).
Problem Solution
The printhead is over temperature.
Allow the printer to cool. Printing automatically
resumes when the printhead elements cool to an
acceptable operating temperature.