Printing a test label 19, Printing a test label – Zebra Technologies XiIII User Manual

Page 25

Printing a Test Label

To print a test label:

1. Turn off the printer.

2. Press and hold the CANCEL key

while turning on the printer.

A configuration label, which shows the
printer’s currently stored parameters,
will print (similar to the one shown in
Figure 12).

If you encounter any problems while you are configuring or calibrating the
printer or printing a test label, refer to

, which starts on

page 75. Otherwise, refer to

on page 21 to set

up the communication parameters.

Zebra XiIII-Series User’s Guide 19

Figure 12