Important safety instructions – Xantrex Technology ENERGY HW 1000 User Manual
Page 7
v
Important Safety Instructions
R
EAD
AND
SAVE
THIS
O
WNER
’
S
G
UIDE
FOR
FUTURE
REFERENCE
.
This chapter contains important safety and operating instructions for the
Freedom HW Inverter/Charger
unit.
1. Before installing and using the
Freedom HW
, read all instructions and
cautionary markings on the
Freedom HW
, the batteries, and all
appropriate sections of this guide.
2. Do not expose the
Freedom HW
to rain, snow, spray, or bilge water.
To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the
Freedom HW
in a zero-clearance
compartment. Overheating may result.
3. To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the
Freedom HW
with damaged or substandard wiring.
4. The use of any attachments not recommended or sold by Xantrex,
may result in risk of fire, electric shock, or injury to persons.
5. Do not operate the
Freedom HW
if it has received a sharp blow, been
dropped, or otherwise damaged in any way. If the
Freedom HW
is
damaged, see the Warranty section.
WARNING: Limitations on use
The
Freedom HW
is not intended for use in connection with life support systems
or other medical equipment or devices.
CAUTION: Risk of injury
To reduce the risk of injury, charge only 12 Vdc lead-acid (GEL, AGM, or
Flooded) rechargeable batteries. Other battery types may burst, causing personal
injury and damage.