Xantrex Technology ENERGY HW 1000 - Manual (Page 45)

Operating in Inverter Mode
975-0467-01-01 4–7
Solid RED
E01
through
e04
Fault condition detected and AC output power is not
available. The unit will sound an alarm and will shutdown
completely within 30 seconds.
See
Table 5-1, “Error Codes Displayed on the Display Panel
Screen” on page 5–5 .
Off Off Inverter is OFF.
Off (or Yellow)
00
.
0
No communication between the Freedom HW and the
Display Panel because the battery voltage was too low to
start the Inverter.
Table 4-1 Status LED during Inverter Mode
Status LED Display Screen Condition