Yamaha CLAVINOVA CVP-505 - Manual (Page 81)

CVP-509/505/503/501 Owner’s Manual 81
Registr
ation Memor
y – Sa
ving and Recalling Custom P
anel Setups –
6
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection Display.
2
Press one of the [A] – [J] buttons to select a Bank.
You can also use the [DATA ENTRY] dial and the [ENTER] button to select a
Bank.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
You can call up the information display to take a look which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
1
Simultaneously press the REGIST BANK [+] and [-] buttons to
call up the Registration Bank Selection display, then use the
[A] – [J] buttons to select the desired Bank.
2
Press the [7▲] (INFO.) button to call up the information display.
By using the TAB [
E][F] buttons, you can switch between the two information
display pages: information for the Registration Memory [1] – [4] buttons and
information for the [5] – [8] buttons.
3
Press the [F] (CLOSE) button to close the information display.
Recalling a Registered Panel Setup
NOTE
When recalling the setups including
Song/Style file selection from a USB
storage device, make sure that the
appropriate USB storage device
including the registered Song/Style is
connected into the [USB TO DEVICE]
terminal.
Confirming the Registration Memory Information
1
2
NOTE
You can instantly call up the informa-
tion display of the currently selected
Registration Memory Bank by press-
ing the [DIRECT ACCESS] button and
one of the REGISTRATION MEMORY
[1] – [8] buttons in sequence.
2
3
NOTE
If some Voice part is set to off (CVP-
509/505), the Voice name for corre-
sponding part is shown in gray.
(On the CVP-503/501, the Voice part
name for corresponding part is shown
in gray.)