Yamaha CLAVINOVA CVP-505 - Manual (Page 118)

118 CVP-509/505/503/501 Owner’s Manual
Installing the Flopp
y Disk Dr
iv
e (Optional) (CVP-509/505)
3
Installing the Floppy Disk Drive
(Optional) (CVP-509/505)
The floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case
and screws.
For a list of optional floppy disk drives available for this instrument, see “Optional Accessories” (page 127).
1
Remove the three backing papers from the
adhesive tape in the case, and fit the floppy
disk drive into the case.
2
Fold the USB cable inside the case as shown.
3
Attach the drive and case assembly to the left
underside of the instrument, using the
included four screws (4mm x 10mm).
4
Connect the USB cable to the [USB TO
DEVICE] terminal.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
Insert the drive to the case, with the side having the rubber
stoppers facing the case.
Dual-sided adhesive tape