Zoom 4412A - Manual (Page 36)

36 Wireless-G PC Card Adapter
Windows 2000
1111
Follow these steps to open the Internet Protocol (TCP/IP)
Properties
dialog box.
a aa a
From the desktop, click the Start button, point to
Settings
, then click Network and Dial-up
Connections .
b bb b
Right-click the Local Area Connection icon, and select
Properties
.
c cc c
In the Properties dialog box, in the Connect Using box,
make sure the Zoom Wireless-G PC Card adapter is
displayed.
From the Components list, select Internet Protocol
(TCP/IP) and click the Properties button.
d dd d
If you have an ad hoc network, continue with step 2. If
you have an infrastructure network, continue with step 3.
2222
Complete the following steps to set static IP addressing:
a aa a
In the Internet Protocol (TCP/IP) Properties dialog
box, ensure that Obtain an IP address automatically is
not selected. Then make sure the buttons labeled Use
the following IP address
and Use the following DNS
server addresses are selected.
b bb b
If this is the first computer to be set up in the ad hoc
network, enter 10.0.0.5 for IP address. If you are adding
it to an existing ad hoc network, increment the last digit
by one, for example, 10.0.0.6, 10.0.0.7
c cc c
Enter 255.255.255.0 for Subnet mask. The Subnet
mask
remains the same for each computer in your ad
hoc network.
d dd d
Enter 10.0.0.5 for Default gateway and Preferred DNS
server
. (This is the IP address of the first computer that
was set up in your ad hoc network.) The Default
Gateway
and Preferred DNS server should be the
same for each computer in your ad hoc network.