Zoom 4412A - Manual (Page 17)

Chapter 2: Setting Security 17
WPA-PSK (Pre-Shared Key)
If not all of the wireless devices in your network support the
recommended WPA2-PSK, select WPA-PSK.
5 55 5
In the Security Configuration window, click the Encryption
Mode
drop-down arrow and select WPA-PSK.
6 66 6
In the Pre-shared key [WPA] area, enter the same network
key that is used on the wireless access point. We advise a
key with a minimum of 20 random characters.
7 77 7
Click OK to save your settings and return to the
Configuration
tab.
8 88 8
On the Configuration tab, click Apply.
9 99 9
Click the Close box to exit the configuration software.