Yamaha NOT FOND DSP-Z11 - Manual (Page 41)

Connections
41
En
Prepara
tion
D YPAO indicator
Lights up when you run “Auto Setup” and when the speaker
settings set in “Auto Setup” are used without any modifications (see
page 42).
E ENHANCER indicator
Lights up when the Compressed Music Enhancer mode is selected
(see page 59).
F PRE AMP indicator
Lights up when this unit is in the pre-amplifier mode (see
page 120).
G SILENT CINEMA indicator
Lights up when headphones are connected and a sound field
program is selected (see page 60).
H SLEEP indicator
Lights up while the sleep timer is on (see page 52).
I VOLUME level indicator
Indicates the current volume level.
y
When the audio output is muted, the VOLUME level indicator flashes (see
page 50).
J Input channel and speaker indicators
Input channel indicators
• Indicate the channel components of the current digital input
signal.
• Light up or flash according to the settings of the speakers
when this unit is in the auto setup procedure (see page 42) or
the speaker level setting procedure in the “Speaker Level”
(see page 86).
Presence speaker indicators
Light up according to setting for “Front Presence” and “Rear
Presence” (see page 84) in “Speaker Set” when this unit is in the
auto setup procedure (see page 42) or the speaker level setting
procedure in the “Speaker Level” (see page 86).
y
You can make settings for the presence and surround back speakers
automatically by running “Auto Setup” (see page 42) or manually by
adjusting settings for “Front Presence”, “Rear Presence” (see page 84),
and “Surround Back” (see page 84) in “Speaker Set”.
K ZONE2/ZONE3/ZONE4 indicators
Lights up when Zone 2, Zone 3, or Zone 4 is turned on
(see page 111).
Presence speaker indicators
Input channel indicators C R L LFE
SR SL FPR
SB SBR SBL RPR