Yamaha NOT FOND DSP-Z11 - Manual (Page 101)

Controlling this unit by using the Web browser (Web Control Center)
101
En
Ad
v
a
nce
d
Op
eratio
n
You can operate this unit by using a Web browser. You can select the input source and sound field program, browse the iPod or network/USB
contents, select the preset items, and adjust the parameters of this unit by using the graphical user interface (Web Control Center) that appears
in the Web browser. Check the IP address of this unit by using “IP Address” in “Network” menu (see page 92) in advance, and then enter the
IP address to the Web browser to access this unit to control it.
y
• To use this feature, this unit and your PC must be connected properly in the network. See page 37 for details of the connections.
• We recommend that you use Windows Internet Explorer 6 or 7 that is installed on Windows XP or Windows Vista PC to access this unit.
• You can select whether this unit accepts the controls by using the Web browser when this unit is in the standby mode. See page 119 for details.
• You can register the MAC address of the PCs you want to use to control this unit and limit the PCs that can control this unit by using the Web browser. You can select that this unit
allows the access to this unit by the PCs whose MAC addresses are registered to this unit or allows the access by any PCs by using “MAC FILTER” in “Advanced setup” (see
page 120).
Controlling this unit by using the Web browser (Web Control Center)
Controlling Network/
USB features
PC
This unit
Power on/off Selecting the input source
Web browser
Control
Adjusting the
system parameters
And many other features...