Yamaha NOT FOND DSP-Z11 - Manual (Page 14)

Quick start guide
14
En
Place your speakers in the room and connect them to this unit.
For other speaker configurations
If you want to connect less than 11 speakers and 2 subwoofers, connect the speakers as follows.
Step 1: Set up your speakers
Front left
Front
right
Center
Surround
left
Surround
right
Surround
back left
Surround
back right
Front
presence
left
Front
presence
right
Rear
presence
left
Rear
presence
right
Subwoofer
left
Subwoofer
right
11.2/11.1
9.2/9.1
7.2/7.1
6.2/6.1
5.2/5.1
3.2/3.1
2.2/2.1
1 2 3 4 1 2 3 4 1 Make sure that this unit and the subwoofers are unplugged from the AC wall
outlets.
2 Twist the exposed wires of the speaker cables together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal part of this unit.
Surround right
speaker Surround back
right speaker Front right
speaker Center speaker
Loosen Insert Tighten
Right front
presence speaker
Right rear
presence speaker