ZyXEL Communications 56K Plus Series - Manual (Page 44)

Omni 56K Plus Series User’s Guide
4-16 Command Sets
Table 4-11 Service Class 2.0 Commands
COMMAND DESCRIPTION VALUE
+FAA=n Adaptive Answer Mode n=0:Answers as set by +FCLASS
n=1:Answers and auto-
determines the call type.
+FCT=n Phase C Timeout n=0-ffh,1 sec units
+FMS=n Minimum Phase C Speed n=0:2400 bps
n=1:4800 bps
n=2:7200 bps
n=3:9600 bps
n=4:12000 bps
n=5:14400 bps
+FBS? Buffer Size 512,256
4.3 Voice AT Commands
Table 4-12 Voice AT Commands
COMMAND FUNCTION OPTION DEFAULT DESCRIPTION
+FLO Flow control
select.
0,1,2 2 0: NO flow control.
1: (XON/XOFF) Software flow control.
2: (RTS/CTS) Hardware flow control.
+VIP Initialize
parameters.
N/A N/A +VSD=15,70 (15*4, 7 second)
+VTD=100 (1 second)
+VRN=10 (10 second)
+VRA=70 (7 second)
+VGR=0 (Enable AGC)
+VGT=128
+FLO=2 (RTS/CTS)
+VIT=70 (7 second)
+FCLASS Voice/data/fax
selection
0,1,2.0,8 0 0: DATA.
1: CLASS 1 FAX.
2.0: CLASS 2.0 FAX.
8: VOICE.
+FMI? Manufacturer
ID.
N/A ZyXEL
+FMM? Model ID N/A Omni 56K
+FMR? Revision N/A Vx.xx
+VRX Voice
recording
N/A N/A Start recording.